Disclaimer: MemoryShare is not affiliated with Mevo or Logitech.
This article only shows how to connect MemoryShare to your Mevo to livestream.
For issues, troubleshooting, solutions, tips, and local network connectivity with your Mevo camera, visit Mevo Support to get the most out of your Mevo.
Click here to purchase a Mevo.
Download the appropriate Mevo App.
If using a single Mevo: One Mevo App
If using more than one Mevo: Mevo Multicam App
Note: MemoryShare does not support, monitor, or control your local wifi or cellular network connections.
After you've connected your Mevo(s) to your local wifi and mobile device, follow these steps to stream with MemoryShare.
Connect MemoryShare to Mevo
Open the MemoryShare App
Start the Stream in Advanced Settings
Copy the RTMP and Stream Key into your Mevo
Go Live in Mevo
Connecting MemoryShare and your Mevo Multicam App
Crop and Zoom in Mevo
Uploading Mevo Videos to MemoryShare via iPad/iPhone App
Connection Problems
If you see the error pictured above you can double check your connection, or wait a minute.
MemoryShare's cloud servers take 30 seconds to 4 minutes to start. During this starting time, if you try to stream with the Mevo you will see the error pictured above. To resolve just wait a few seconds or minutes, then press the record button again. If the engine is on, the error will go away and you will be streaming.
Timeouts
You may also see this error if the server has timed out. If you started the stream, and didn't go live for 20 minutes the server will timeout. To fix this, go back to the MemoryShare app and tap "Pause Stream", then tap again "Start Stream". This will reset the cloud engine and you will be able to stream the service.